DVD-D360K
DVD-D530
DVD-D530K
DVD Player
User Manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
AK68-01992A
ENGLISH
MPEG4
This unit can play MPEG4 formats within an
avi file.
HDMI (High Definition Multimedia
Interface) (Only DVD-D530K/DVD-
D530)
TV SET COMPATIBILITY WITH THIS MODEL
576p, 720p, 1080p DVD PLAYER, PLEASE
CONTACT SAMSUNG’S CUSTOMER SERVICE
CENTER.”
Description
Front Panel Controls
7
DVD-D530
Disc Markings
HDMI reduces picture noise by allowing a pure-
digital video/audio signal path from the player
to your TV.
~
Play Region Number
CD Ripping
PAL broadcast system in U.K,
France, Germany, etc.
7
This feature lets you to copy audio files from
disc to USB device into MP3 format. (Only
Audio CD (CD DA)).
PAL
DVD-D530K
DVD-D360K
Dolby Digital disc
Note
-
-
-
Discs which cannot be played with this
player.
STEREO
Stereo disc
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• CVD
DIGITAL
Digital Audio disc
SOUND
1. DISC TRAY
Place the disc here.
2. DISPLAY
Operation indicators are displayed here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. STOP ( )
6. POWER ON/OFF (
Turn on/off and the player is turned on/off.
7. USB HOST
)
Ability to play back may depend on recording
conditions.
• DVD-R, +R
MP3 disc
Connect digital still camera, MP3 player,
memory stick, Card reader other removable
storage devices.
• CD-RW
Region Number
• DVD+RW, -RW (V mode)
The unit may not play certain CD-R, CD-RW
and DVD-R due to the disc type or recording
conditions.
8. MIC
Both the DVD player and the discs are coded by
region. These regional codes must match in order
for the disc to play. If the codes does not match,
the disc will not play.
Stops play.
5. PLAY/PAUSE (
(Only DVD-D530K/D360K)
Connect Microphone for karaoke functions.
)
Play or pause the disc.
COPY PROTECTION
Many DVD discs are encoded with copy pro-
tection. Because of this, you should only con-
nect your DVD player directly to your TV, not to
a VCR. Connecting to a VCR results in a dis-
torted picture from copy-protected DVD discs.
The Region Number for this player is described
on the rear panel of the player.
Tour of the Remote Control
DVD-D360K
DVD-D530
DVD-D530K
DivX Certification
This item incorporates copy protection technol-
ogy that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
1
2
1
2
15
16
15
16
DivX, DivX Certified, and asso-
ciated logos are trademarks of
DivXNetworks, Inc and are used under license.
1
6
7
8
24
11
10
15
18
3
3
17
18
19
4
17
18
19
4
17
5
5
5
20
28
6
6
“DivX Certified to play DivX video, including
premium content.”
21
21
26
7
8
22
23
24
7
20
22
23
24
PROGRESSIVE SCAN OUTPUTS
(576p,720p,1080p)
9
28
27
9
12
Covered by one or more of the following U.S
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
10
11
12
10
11
12
25
26
27
25
26
27
“CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE, IN CASE
OF 576, 720, 1080 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING YOUR
13
22
21
28
30
20
13
14
13
14
14
29
29
30
3
1. DVD POWER Button
Turns the power on or off.
2. DVD Button
(Only DVD-D530K/D530)
HDMI Output resolution setup.
17. USB Button
18. VIDEO SEL. Button
A. Connecting to a TV (For Video)
1. Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on
the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
2. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
(Only DVD-D530K/D530)
Use to select the DVD player for operation.
3. TV Button
(Only DVD-D530K/D530)
Use to select a Samsung TV for operation.
4. EZ VIEW Button
(Only DVD-D530K/D530)
Lets you easily adjust the aspect ratio of a
picture according to the screen size of your
TV (16:9 or 4:3).
5. MARKER Button
6. REPEAT Button
Allows you to repeat play a title, chapter,
track, or disc.
7. DISC MENU Button
Brings up the Disc menu.
Changes video output mode.
19. REPEAT A-B Button
(Only DVD-D530K/D530)
Allows you to repeat play a chosen section
(A-B) on a disc.
Note
-
-
-
Noise may be generated if the audio cable is too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
The number and position of terminals can vary depending on your TV set. Please refer to the user’s
manual of the TV.
20. INFO Button
Used to displays playback info banner.
21. TITLE MENU Button
Brings up the Title menu.
22. AUDIO/TV SOURCE Button
Use this button to access various audio
functions on a disc. Use this button to select
an available TV source (mode TV).
23. PAUSE Button ( )
(Only DVD-D530K/D530)
Pauses disc play.
-
-
If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of
the DVD player.
If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN)
8. RECORD Button
(Only DVD-D530K/D360K)
Use to Karaoke recording.
9. TV VOL (+, -) Buttons
(Only DVD-D530K/D530)
Controls volume.
B. Connection to a TV (Interlace/Progressive)
24. SEARCH Buttons (
/
)
1. Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the
DVD player to the COMPONENT IN terminal of TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD
player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the Component signal from the DVD player
appears on the TV screen.
Allows you to search forward/backward
through a disc.
25. TV CH (
,
(Only DVD-D530K/D530)
) Buttons
10. SKIP Buttons (
/
)
Channel selection.
Use to skip the title, chapter or track.
26. PLAY Button ( )/
Begins disc play.
27. RETURN Button
(
)
11. STOP Button (
)
4. Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO SEL.
button to change the Video Output mode.
12. MENU Button
Brings up the DVD player’s menu.
13. ENTER/π/†,√/® Buttons
This button functions as a toggle switch.
14. TOOLS Button
Displays the current disc mode. It also lets
you access the Display function.
15. OPEN/CLOSE ( ) Button
Returns to a previous menu.
28. SUBTITLE/(
29. EXIT Button
π
)
Button
Note
- What is “Progressive Scan”?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive
scanning method can provide better and clearer picture quality.
(Only DVD-D530K/D530)
Exits the on-screen menu.
30. KARAOKE (†) Button
(Only DVD-D530K/D360K)
To access karaoke menu (Keycon, mic vol-
ume, Echo).
C. Connecting to a TV with DVI/HDMI Jack (ONLY DVD-D530K/D530)
To open and close the disc tray.
16. HDMI SEL. Button
1. Using the HDMI-DVI/HDMI-HDMI cable , connect the HDMI OUT terminal on the rear of the DVD
player to the DVI/HDMI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD
player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.
3. Press the input selector on your TV remote control until the DVI/HDMI signal from the DVD player
appears on your TV screen.
Connections
Choosing a Connection
HDMI VIDEO Specifications (ONLY DVD-D530K/D530)
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
When you press the HDMI SEL. button, 480p, 576p, 720p, 1080p, 1080i are selected in order.
The first press of the HDMI SEL. button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
Before Connecting the DVD Player
-
Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
-
-
-
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10
seconds.
-
Refer to the user’s manual of the additional components you are connecting for more information on
those particular components.
4
-
-
If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.
If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this
DVD player using your TV remote control. This is only available with Samsung TVs that support
Anynet+(HDMI-CEC).
DVD-D530K
DVD-D530
2-Channel stereo amplifier
or Dolby digital
WHITE
RED
- If your TV has an
logo, then it will
Supports the Anynet+ Function.
Audio Cable
Coaxial Cable
D
•
HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single
connector.Using HDMI, the DVD player transmits a digital video and audio signal and displays a
vivid picture on a TVhaving an HDMI input jack.
WHITE
RED
WHITE
•
HDMI connection description HDMI connector
GREEN
BLUE
-
-
Both uncompressed video data and digital audio data (LPCM or Bit Stream data).- Though the
player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears
on the screen.
RED
YELLOW
RED
Audio Cable
C
Video
Cable
A
Component
Cable
• Why does Samsung use HDMI?
B
OR
WHITE
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data trans-
mitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an
analog-to-digital converter (in the TV) is required. During this conver-sion, the picture quality is
degraded due to noise and signal loss. DVI technology is superior because it requires no D/A con-
version and is a pure digital sig-nal from the player to your TV.
RED
YELLOW
HDMI cable
RED BLUE
HDMI-DVI cable
GREEN
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted
via DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized.
DVD-D360K
D.Connection to an Audio System (2 Channel Amplifier, Dolby Digital,
or MPEG2 )
2-Channel stereo ampilfier,
Dolby digital
WHITE
RED
COAXIAL CABLE
D
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD
player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect
the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO
IN (COAXIAL) terminal of the Amplifier.
BLUE
GREEN
WHITE
RED
WHITE
RED
RED
YELLOW
2. Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the
rear of the DVD player to the VIDEO, COMPONENT or DVI IN terminals of your TV
3. Turn on the DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from the
DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
VIDEO CABLE
A
AUDIO CABLE
COMPONENT CABLE
B
YELLOW
RED
WHITE
RED BLUE GREEN
5
Using the Display Function
Basic functions
Playing a Disc
When Playing a DVD/VCD/MPEG4
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
3. Press the √/® buttons to make the desired setup.
4. To make the screen disappear, press the TOOLS button again.
Before Play
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
The functions when using the Display function are listed in the table below.
To access the desired title when there is more than one in the disc. For example, if there is
more than one movie on a DVD, each movie will be identified.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If
you want to select a language, press the π/† button, and then press the ENTER button. (This screen
will only appear when you plug in the player for the first time.)If the language for the startup screen is
not set, the set-tings may change whenever you turn the power on or off. Therefore, make sure that you
select the language you want to use.Once you select a menu language, you can change it by pressing
the ®|| button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your preferred language.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage.
Allows playback of the film from a desired time. You must enter the starting time as a refer-
ence.The time search function does not operate on some disc.
Refers to the language of the film soundtrack. In the example, the soundtrack is played in
English 5.1CH. A DVD disc can have up to eight different soundtracks.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the
next selection.
Refers to the subtitle languages available in the disc. You will be able to choose the subtitle lan-
guages or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different sub-
titles.
E
Z
User will be able to choose EZ-View type.
Searching through a Chapter or Track
During play, press the SEARCH (k or K) button on the remote control for more than 1 second.
Press enter to activate the Zoom function.
Note
-
DVD
CD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
4X, 8X
The speed marked in this function may be different from the
actual playback speed.
No sound is hearing during search mode (Except CD).
To access the desired Angle function. Some DVD disc are have more than one recorded angle.
VCD
-
Using the Disc and Title Menu
Skipping Tracks
During the playback of a DVD disc, press the DISC MENU/TITLE MENU button on the remote control.
During play, press the SKIP (|k or K|) button.
Note
-
-
-
When playing a DVD, if you press the SKIP (K|) button, it moves to the next chapter. If you press the
SKIP (|k) button, it moves to the beginning of the chapter. One more press makes it move to the
beginning of the previous chapter.
-
-
-
Depending on a disc, the Disc Menu/Title Menu may not work.
You can also use the Disc Menu, using the DISC MENU button on the remote control.
Title Menu will only be displayed if there are at least two titles in the disc.
When playing a VCD, if you press the SKIP (K|) button, it moves to the next track. If you press the
SKIP (|k) button, it moves to the beginning of the track. One more press makes it move to the
beginning of the previous track.
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
If a track exceeds 15 minutes when playing a VCD and you press the K| button, it moves forward 5
minutes. If you press the |k button, it moves to the beginning of the track. One more press makes
it move to the beginning of the previous track.
When playing a DVD/VCD
1. Press the REPEAT button on the remote control. Repeat screen appears.
2. Press the REPEAT or π/† button to change playback mode. DVD repeats play by chapter or title.
-
-
-
-
Off.
Title : repeats the title that is playing.
Chapter : repeats the chapter that is playing.
Repeat A-B (Only DVD-D360K)
6
Using the A-B Repeat function (Only DVD-D360K)
Note
This function may behave differently depending on the type of disc.
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the A-B Repeat function (Only DVD-D530K/D530)
Using the AUDIO/ √ button (DVD/VCD/MPEG4)
1. Press the REPEAT A-B button on the remote control.
1. During play, Press the AUDIO/ √ button. Change the audio language by pressing the AUDIO or
π/† button.
- The audio languages are represented by abbreviations.
2.Press the REPEAT A-B button at the point where you want repeat play to start (A).
3.Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
3. To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
.
2. To remove the AUDIO icon, press the EXIT/RETURN button
.
Note
Note
- This function depends on audio languages are encoded on the disc and may not work.
- A DVD disc can contain up to 8 audio languages.
-
A-B REPEAT allows you to set point (B) directly after point (A) has been set.
- Depending on a disc, the Repeat function may not work.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE/(π) button.
Slow Play
This feature allows you slowly to repeat scenes con-taining sports, dancing, musical instruments
being played etc., so you can study them more closely.
Using the SUBTITLE/(π) button (DVD/MPEG4)
1. During play, Press the SUBTITLE/(π) button.
2. Press the SUBTITLE/(π) or π/† button to change the language. Each time you press the
SUBTITLE/(π) or π/† button, the language changes.
When playing a DVD
1. During play, press the PAUSE ( )/PLAY
(
)
button.
3. To remove the SUBTITLE icon, press the EXIT/RETURN button
.
2. Press the SEARCH (k/K) button to choose the play speed between 1/2, 1/4, 1/8,1/16,1/2 and
so on. If you want to go normal play press PLAY button.
Note
- The subtitle languages are represented by abbreviations.
- You have to change the desired subtitle in the Disc Menu, according to discs. Press the DISC MENU
button.
- This function depends on what subtitles are encoded on the disc and may not work on all DVDs.
- A DVD disc can contain up to 32 subtitle languages.
Advanced functions
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
1. During play, press the EZ VIEW/TOOLS button on the remote control.
2. Press the EZ VIEW or π/† buttons to select the screen size. Each time you press the π/† or √/®
buttons, the screen size changes. For graphics of the screen sizes and lists of the sequences in
which the sizes change, see the next column.
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE appears on the screen.
3. Press the EXIT/RETURN button to exit EZ View.
1. During play, press the TOOLS button on the remote control.
If you are using a 16:9 TV
If you are using a 4:3 TV
2. Press the π/† buttons to select
icon. When the angle screen is displayed, press the √/® but-
For 16:9 aspect ratio discs
- WIDE SCREEN
- SCREEN FIT
For 16:9 aspect ratio discs
- 4:3 Letter Box
- 4:3 Pan Scan
tons on the remote control to select the desired angle option.
Using the Bookmark Function
This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find
them at a later time.
- ZOOM FIT
- SCREEN FIT
- ZOOM FIT
For 4:3 aspect ratio discs
- Normal Wide
- SCREEN FIT
For 4:3 aspect ratio discs
- Normal Screen
- SCREEN FIT
Using the Bookmark Function (DVD/VCD)
1. During play, press the MARKER button on the remote control.
2. When you reach the scene you want to mark, press the √/® or π/† buttons, and then press
- ZOOM FIT
- Vertical Fit
- ZOOM FIT
MARKER button. Up to 12 scenes may be marked at a time
.
7
Repeat/Random playback
Note
-
Depending on a disc, the Bookmark function may not work.
Press the REPEAT button to change the playback mode. There are four modes, such as Off, Track,
Folder and Random.
- Off ( ): Normal Playback
Recalling a Marked Scene
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select a marked scene.
3. Press the PLAY () button to skip to the marked scene.
1
- Track ( ): Repeats the current song file.
- Folder ( ): Repeats the song files which have the same extension in the current folder.
- Random ( ): Song files which have the same extension will be played in random order.
To resume normal play, press the REPEAT button until the Repeat : Off.
Clearing a Bookmark
CD-R MP3/WMA file
1. During play, press the MARKER button on the remote control.
2. Press the √/® orπ/† buttons to select the bookmark number you want to delete.
3. Press the ENTER button to delete a bookmark number.
When you record MP3 or WMA files on CD-R, please refer to the following.
-
-
-
Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft’s DOS and Windows, and with
Apple’s Mac. This format is the most widely used.
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension.
General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 char-
acters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to MP3 format, of at
least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give
better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played prop-
erly.
1. During play or pause mode, press the TOOLS buttons on the remote control.
2. Press the π/† buttons to select
icon, then press the ENTER button to zoom in X1,X2,X3,X4
.
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can
be organized into folders as shown below. They are similar to how you use your computer to put
files into different folders.
Pages
Videos
\
1/2
To go access these folders and the files in them, follow these steps :
-
Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of
at least 64Kbps and up to 192Kbps. Conversely, files with decompression rates below 64Kbps or over
192Kbps will not be played properly. Sampling rate that can be supported for WMA files is > 30Khz.
Do not try recording copyright protected MP3 files.
1. Open the disc tray. Place the disc on the tray.
2. Close the tray. The tray closes and the Parent Folder Menu screen
appears (top screen image.) Parent folders contain all the Peer folders that
have the same kind of content: music, video, photos, etc.
CD
Pages
Move
Return
3. Press the √/® buttons to select the Parent folder of your choice, and then
-
press the ENTER. A screen displaying the Peer folders appears. The Peer folders contain all the fold-
ers with the same kind of content (video, music, photos, etc.) that are in the Parent folder.
Certain “secured” files are encrypted and code protected to prevent illegal copying. These files are of the
following types: Windows Media (registered trade mark of Microsoft Inc) and SDMI (registered trade mark
of The SDMI Foundation). You cannot copy such files.
TM
TM
Folder Selection
-
Important:
The folder can be selected both in Stop or Play mode.
The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings,
or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file
recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
-
To select the Parent Folder
Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and press
ENTER to go to the parent folder.
-
This unit can play a maximum of 500 files and 500 folders per disc.
-
-
To select the Peer Folder
Press the π/† buttons to select the desired folder, then press ENTER.
MPEG4 Playback
To select the Sub-Folder
Press the π/† buttons to select the desired folder, then press ENTER.
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions
can be played.
MP3/WMA/CD Audio Playback
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Music folder, and then press ENTER. Press the π/† buttons
to select a song file, and then press the ENTER to begin playback of the song.
1. Open the disc tray. Place the disc on the tray. Close the tray.
2. Press the √/® buttons to select a Videos Menu , then press the ENTER. Press the π/† to select
an avi file (DivX/XviD) then press the ENTER. Press the π/† and then press the ENTER button.
8
Repeat and Repeat A-B playback
This unit supports all resolutions up to maximum below.
DivX5
Note
1. Press the REPEAT button , then press REPEAT or π/† buttons to change playback mode. There
are 3 modes, such as Off, Folder and Title.
•
The resolution that can be supported by
DVD-D530/D530K model up to 720 x 480
@30 frames/ 720 x 576 @25 frames.
This unit supports CD-R/RW written in
MPEG4 in accordance with the “ISO9660
format”.
720 x 480 @30fps
- Off : No Repeat mode.
- Title : repeats the title that is playing.
- Folder : repeats the AVI files which have the same extension in the current folder.
720 x 576 @25fps:
•
Maximum bitrate : 4Mbps
Repeat A-B playback (Only DVD-D360K)
1. Press the REPEAT button on the remote control. The repeat screen appears.
2. Press the π/† button to select the REPEAT A-B and then press ENTER.
3. Press the ENTER at the point where you want repeat play to start (A).
4. Press the ENTER at the point where you want repeat play to start (B).
Playing Media Files Using the USB Host feature
You can enjoy the media files such as pictures, movies andtunes saved in an MP3 player, USB memory
or digital camera in high audio by connecting the storage device to the USB port of the DVD Player.
Using the USB HOST feature
Repeat A-B playback (Only DVD-D530K/D530)
1. Connect the USB device to the USB port on the front of the unit.
2. The USB Menu screen appears. Press the √/® button to select Menu, then press ENTER.
3. Press the π/† buttons to select a file in the USB device. Press ENTER to Open the file.
1. Press the REPEAT A-B button on the remote control.
2.Press the REPEAT A-B button at the point where you want repeat play to start (A).
3.Press the REPEAT A-B button at the point where you want the repeat play to stop (B)
- To return to normal play, press the REPEAT A-B button until the display shows Repeat : Off
.
Note
•
Each time the USB button on the remote control is pressed, a frame of the USB device selection
will appear.
Note
•
•
“USB Loading” appears on the display screen.
-
A-B REPEAT allow you to set point (B) directly after point (A) has been set.
Depends on the file size and clip duration, loading time on USB may take longer than using CD or DVD
media.
MPEG4 Function Description
•
•
USB MENU screen appears on the TV screen and the saved file is played.
If there is a Disc in the unit, pressing the DVD button (DVD-D530K/DVD-D530) or USB button (DVD-
D360K) will make the player exit the USB menu and load the disc
Function
Description
Skip
(|k or K|)
During play, press the |k or K| button, it moves to next or previous track.
Safe USB Removal
1. Press the DVD button (DVD-D530K/DVD-D530) or USB button (DVD-D360K) to return to disc
mode or the main screen
2. Press the STOP (■) button
3. Remove the USB cable.
During play, press the SEARCH (k or K) button and press again to search at
a faster speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X,
16X, 32X)
.
Search
(k or K)
Slow Motion Play Allows you to search at a slower speed in an AVI file. (1/2, 1/4, 1/8, 1/16)
Skip Forward/Back
During playback, press the (|k/K|) button.
ZOOM
X1/X2/X3/X4/Normal in order
•
•
When there is more than one file, when you press the K| button, the next file is selected.
- These functions may not work depending on MPEG4 file.
When there is more than one file, when you press the |k button, the previous file is selected.
Fast playback
CD-R AVI fileThis
-
-
Xvid (MPEG-4 compliant video codec) and
DivX Pro
File format : *.avi, *.div, *.divx.
unit can play the following video compression
formats within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG-4 Simple
Profile)
- DivX 5 contents (MPEG-4 simple profile plus
additional features such as bi-directional frames.
Qpel and GMC are also supported.)
- XviD MPEG-4 compliant Contents.
To play back the disc at a faster speed, press (k/K) during playback
•
Each time you press either button, the playback speed will change as follows : 2X ➞ 4X ➞ 8X ➞ 16X
Possible warning messages that may appear
when trying to play DivX/AVI files are :
1. No Authorization
- File with bad registration code.
2. Unsupported Codec
- Files with certain Codec Types, Versions
(ex. MP4, AFS and other proprietary
codecs) are not suppoerted by this player.
3. Unsupported Resolution
➞ 32X
.
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.(USB devices that operate as a removable disk in
Windows (2000 or later) without additional driver installation.)
2. MP3 Player: Flash type MP3 player.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (2000 or later) without additional driver
installation.
4. USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
DVD-RW & DVD+R
Format that support for DivX file :
- Basic DivX format DivX3.11 / 4.12/ 5.x
- Files containing resolutions higher than the
player’s specification are not supported.
9
• Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Rotation
•
-
-
-
-
Press the TOOLS button to select Rotate, and then press the ENTER button.
Each time the √/® buttons are pressed, the picture rotates 90 degrees clockwise.
Each time the π button is pressed, the picture will reverse to the upside down to show a mirror image.
Each time the † button is pressed, the picture will reverse to the right side to show a mirror image.
•
•
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
Zoom
•
•
•
A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
Some MP3 players, when connected to this product,may not operate depending on the sector size of
their file system.
The USB HOST function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
-
-
Press the TOOLS button to select Zoom, and then press the ENTER button.
Each time ENTER button is pressed, the picture is enlarged. Zoom mode : X1-X2-X3-X4-X1.
Slide Show
-
When you press the PLAY at JPEG file, it will go to full screen mode and automatically slide
show.
•
•
•
Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices.
The USB Host does not support USB Hard Disc Drives (HDD).
Note
-
-
Depending on a file size, the amount of time between each picture may be different from the manual.
If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
CD Ripping
This feature allows you to copy audio files from a disc to a USB device in MP3 format.
Picture CD Playback for HD-JPEG (Only DVD-D530K/
DVD-D530)
Open the dics tray. Place the Audio CD(CD DA) disc on the tray, and close the tray. Connect the USB
device to the USB port on the front of the unit. Press the DVD button (DVD-D530K/DVD-D530) or USB but-
ton (DVD-D360K).
Must connect to HDMI. Resolution should be 720p/1080i/ 1080p, and HD-JPEG should be in HD mode.
1. Press the TOOLS button to display the Ripping screen.
2. Press the π/† buttons, then press the ENTER button to select files for ripping.
1. Select the desired folder.
2. Press the π/† buttons to select a Picture file in the clip menu and then press the ENTER button.
• Press the STOP (■) button to return to the clips menu.
-
To deselect files, press ENTER button again.
3. Press the √ and † button to select START, then press the ENTER button begin ripping.
The Ripping menu contain the following buttons :
• When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
-
-
Mode (Fast/Normal)
Bitrate, press ENTER to change : 128kbps ➞ 192kbps ➞ 128kbps.
• Standard : 128kbps
•
Rotation
Press the TOOLS button to select Rotate, and then press the ENTER button. Press the √/® button
to rotate the screen 90 degrees to the left/right.
•
Zoom
• Better Quality : 192kbps
Press the TOOLS button to select Zoom, and then press ENTER.
Each time ENTER button is pressed, the picture is enlarged. Zoom mode : X1-X2-X3-X4-X1.
-
-
Device selection, press ENTER to change between partitions on the USB device (max 4).
Select - Unselect, press ENTER to change from Select all (files) or Select none.
•
•
Skip Picture
Note
Press the |k or K| button to select previous or next picture.
Slide Show
Press the PLAY (®) button to start SLIDE function.
Press the PAUSE (∏∏) button to stop SLIDE function. To continue slide show press PLAY button.
- To cancel copying in progress, press the ENTER button.
- To return to the CDDA screen, press the TOOLS button again.
- While the CD is being ripped, the player will automatically enter stop mode.
- The ripping process is 2.6 times of normal speed.
- The DVD player can only rip Audio CD (CD DA) discs.
- The USB button does not work while you’re in the Ripping menu.
- CD ripping function may not supported for some MP3 players device.
Note
- Depending on a file size, the amount of time between each picture may be different from the set
interval time.
- The image may be displayed at a smaller size depending on the picture size when displaying images
in HD-JPEG mode.
Picture CD Playback
1. Select the desired folder.
- It is recommended to set the “BD Wise” to “Off” In case of playback JPEG image file bigger than
720 X 480 pixel size.
2. Press the π/† buttons to select a Picture file in the clips menu and then press the ENTER button.
MP3-JPEG Playback
You can play JPEG using music as a backgound.
Note
- Press the STOP button to return to the clips menu.
- When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu.
1. Press the π/† buttons to select an MP3 file in the clips menu and then press the ENTER button.
To return to the menu screen, Press the RETURN or MENU buttons.
10
2. Press the √/® buttons to select Photos Menu, and then press the ENTER button.
Press the π/† buttons to select a JPEG file in the clips menu and then press the ENTER button.
- Music will play from the beginning
Karaoke Sound Recording
1. Insert USB storage media into USB jack and then connected the microphone plug to Mic.
2. To star karaoke recording, choose one of VCD/DVD/SVCD file, then press RECORD button.
3. When recording, user can only press STOP button and PAUSE button to cancel the recording.
4. If user do cancelation, then file result will be saved.
3. Press Stop button when you want to stop the playback.
Note
MP3 and JPEG files have to be on the same disc.
Note
CD-R JPEG Disc
- If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone
away from the speakers or turn down the microphone volume or the speaker volume.
- When playing MP3, WMA and LPCM disc, the karaoke functions will not operate.
- When the MIC is connected, Digital Out does not work.
- The MIC sound outputs only from Analog Audio Out.
- If MIC is connected to the MIC jack on the front panel, 5.1CH audio will be changed in to 2 CH audio
automatically, this condition can’t be change unless the MIC is plugged out.
-
-
Only files with the “.jpg” and “.JPG” extensions can be played.
If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
-
-
Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
-
Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-
session disc, the disc can be played only up to the blank segment.
A maximum of 500 images can be stored on a single CD.
Changing setup menu
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language prefer-
ences, set up a parental level, even adjust the player to the type of television screen you have.
-
-
-
-
-
-
-
-
-
Kodak Picture CDs are recommended.
When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
QSS Picture CD: The unit may not play QSS Picture CD.
1. With the unit in Stop mode, press the MENU button on the remote control. Press the √/® buttons
to select SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select a Setup Menu, then press the ® or ENTER to bring up the sub-
menu.
If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.
If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played.
3. Press the π/† buttons to select a sub-menu option, then press the ® or ENTER.
4. To make the setup screen disappear after setting up, press the RETURN button.
Karaoke functions (Only DVD-D530K/D360K)
Karaoke Functions
Setting Up the Display Options
Display options enable you to set various video functions of the player.
Operation Sequence
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select DISPLAY, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
1. Connect the terminals Mixed Audio Out to TV or Amplifier.
2. Connect the microphone plug to Mic (microphone) and set Karaoke score to On. When MIC is con-
nected and Karaoke score is On, the karaoke functions can be used.
Echo/Microphone Volume/Key Control (Tone control)
Setting Up the BD Wise (Only DVD-D530K/D530)
1. Play the karaoke disc containing the songs you want.
When the player is connected to a SAMSUNG TV which supports “BD Wise”,you can enjoy optimized
Picture Quality by setting the “BD Wise” function as “On”.
- Press the KARAOKE (†) button, and then press π/† to select ECHO, VOL or KEY.
2. Press the √/® buttons to change the desired item.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select DISPLAY, then press the ® or ENTER button.
3. Press the π/† buttons to select BD WISE, then press the ® or ENTER button.
Press the π/† buttons to select ON/OFF, then press the ENTER button.
Karaoke Scoring (Score)
The scoring will appear as :
1. The microphone is connected and Karaoke score is On.
2. At the end of each chapter/title of karaoke disc.
- If the DVD karaoke have any information on the scoring drive.
- In case of VCD, the device can not differentiate between hard karaoke or movies, then the scoring
will always appear.
3. Karaoke score will appear at the end of time for each chapter/title for about 6s.
11
Note
Setting Up the System Options
• This option can be changed only when TV support BD Wise.
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan set-
tings in the TV’s menu system.
• If Video Output is set incorrectly, the screen may be blocked.
• The resolutions available for HDMI output depend on the connected TV or projector. For
details, see the user’s manual of your TV or projector.
• When the resolution is changed during playback, it may take a few seconds for a normal
image to appear.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select SYSTEM, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Anynet+(HDMI-CEC) (Only DVD-D530K/DVD-D530)
Anynet+ is a function that can be used to operate the unit using a Samsung TV remote control, by
connecting the DVD D530/D530K to a SAMSUNG TV using a HDMI Cable. (This is only available with
SAMSUNG TVs that support Anynet+.
• If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better pic-
ture quality.
Select On when you connect the DVD D530/D530K with Samsung TV that support Anynet+.
• It is recommended to set the "BD Wise" to "Off" In case of playback JPEG image file bigger
than 720 X 480 pixel size.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select SYSTEM, then press the ® or ENTER button.
3. Press the π/† buttons to select ANYNET+ (HDMI-CEC), then press the ® or ENTER button.
4. Set the Anynet+(HDMI-CEC) to “On” on your DVD Player, then press the ENTER button.
5. Set the Anynet+ function at your TV. (See the TV instruction manual for more information.).
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings depending on the audio
system in use.
Note
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTING,
then press the ENTER button.
• By pressing the PLAY button of the unit while watching TV, the TV screen will change to the play
screen.
• If you play a DVD when the TV power is off, the TV will power On.
• If you turn the TV off , the DVD Player will power off automatically.
• If you change the HDMI to other sources (Composite,Component,... etc) in TV while playing the DVD
disc, the DVD Player will stop playing.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note :
- When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options menu,
the Digital Audio jack may not output audio
- There is no analogue audio output when you play a sound disc.
- Even when PCM Down sampling is Off
Setting Up the Language Features
• Some discs will only output down sampled audio through the digital outputs.
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up auto-
matically every time you watch a movie.
HDMI (Only DVD-D530K/D530)
-
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, MPEG), you
should set Digital Audio to PCM.
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
sam-pling to On.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select LANGUAGE, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired language, then press the ® or ENTER button.
-
Note
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
-The language is selected and the screen returns to Language Setup menu.
-To make the setup menu disappear, press the MENU button.
-If the selected language is not recorded on the disc, the original pre-recorded language is selected.
-Select “Original” if you want the defaultsoundtrack language to be the original language the disc is
recorded in.
-Select “Automatic” if you want the subtitle language to be the same as the language selected as the
audio language.
-
Some discs may not contain the language you select as your initial language; in that case the disc will use
its original language setting.
12
Setting Up the Security Options
Reference
Troubleshooting
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which
helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Before requesting service (troubleshooting), please check the following.
Setting Up the Rating Level and Changing the Password
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
Problem
Action
2. Press the π/† buttons to select SECURITY, and then press the ® or ENTER button.
Enter your password.
3. Press the π/† buttons to select PARENTAL/CHANGE PASSWORD, and then press the ® or
ENTER button.
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setting will revert to factory settings.
The screen is blocked.
4. Press the π/† buttons to select the rating level you want, and then press the ENTER button.
e.g) Setting up in KID SAFE
• Press the ®|| button (in front panel) for more than 5 seconds under no
disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
Forgot password.
No HDMI output
-
For example, if you select the Kids Safe level, discs that contain level 2 or higher will not play.
5. Enter your password. If this is the first time, enter 0000. Then, enter a new password. The new pass-
word must be a number other than 0000 to activate the parental control function. Then, re-enter the
new password.
•
Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of DVD player.
• See if the TV supports this 480p/ 576p/720p/1080i/1080p DVD player.
Security Levels :
❶
❷
❸
❹
KID SAFE
Abnormal HDMI output
screen.
• If snow noise appears on the screen, it means that TV does not
G (General Audiences) : All Ages Admitted
support HDCP (High-bandwidth Digital Content Protection).
PG (Parental Guidance suggested) : Some material may not be suitable for young children.
PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children under
13.
• Check your TV system setup correctly.
❺
PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but
viewer discretion is advised, and parents and guardians are encouraged to supervise younger viewers.
R (Restricted) : Under 17 requires accompanying adult
NC17 (NC-17) : No one 17 and under admitted.
• The screen Jitter phenomenon may occur when frame rate is converted from 50Hz to
60 Hz for 720p/1080i/ 1080p HDMI (High Definition Multimedia Interface) Output.
• Please refer to the user's manual of your TV.
HDMI output Jitter
❻
❼
❽
ADULT
Note:
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
Setting Up the General Options
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS,
then press the ENTER button.
2. Press the π/† buttons to select GENERAL, then press the ® or ENTER button.
3. Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Support Options
Support option enable you to check your DVD player information such as the model code, Software
Version, The serial and version numbers can be found on the back side of your DVD-Player.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then
press the ENTER button.
2. Press the π/† buttons to select SUPPORT, then press the
®
or ENTER button.
3. Select PRODUCT INFORMATION, then press the or ENTER button.
®
13
Spesifications
Power Requirements
Power Comsumption
AC110~240V, 50/60Hz
For the power supply and power con-
sumption, refer to the label attached
to the product
General
Weight
1.2 Kg
Dimensions
360mm(W) X 207mm(D) X 42mm(H)
+5ºC to +35ºC
Operating Temperature Range
Operating Humidity Range
Composite Video
10 % to 75 %
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Component Video
Video Output
Audio Output
HDMI
480p, 576p, 720p, 1080p, 1080i
(Only DVD-D530K/DVD-D530)
Output terminal
Maximum Output Level
Frequency Response
Digital Audio Out
RCA
2Vrms
20 Hz to 20 kHz
Coaxial terminal (S/PDIF)
14
Memo
15
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Region
Area
Contact Center
1-800-SAMSUNG (726-7864)
Web Site
Canada
www.samsung.com/fi
North America Mexico
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG (726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG (726-7864)
0-800-100-5303
01-8000112112
U.S.A
Argentine
Brazil
Chile
Nicaragua
Honduras
Costa Rica
Ecuador
El Salvador
Guatemala
Jamaica
Latin America
Panama
Puerto Rico
Rep. Dominica
Trinidad & Tobago
Venezuela
Colombia
Belgium
02 201 2418
Czech Republic
Denmark
Finland
800-SAMSUNG (800-726786)
8-SAMSUNG (7267864)
30-6227 515
France
01 4863 0000
Germany
Hungary
Italia
01805-SAMSUNG (726-7864 € 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
3-SAMSUNG (7267864)
0 801 1SAMSUNG (172678), 022-607-93-33
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0845 SAMSUNG (7267864)
Luxemburg
Netherlands
Norway
Poland
Europe
Portugal
Slovakia
Spain
Sweden
U.K
Eire
Austria
0818 717 100
0810-SAMSUNG (7267864, € 0.07/min)
Switzerland
0848-SAMSUNG (7267864, CHF 0.08/min)
Russia
8-800-555-55-55
Kazakhstan
Uzbekistan
Kyrgyzstan
Tadjikistan
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
CIS
Ukraine
8-800-502-0000
Belarus
Moldova
Lithuania
Latvia
810-800-500-55-500
00-800-500-55-500
8-800-77777
8000-7267
800-7267
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858, 010-6475 1880
Estonia
Australia
New Zealand
China
Hong Kong
3698-4698
India
Indonesia
Japan
3030 8282, 1800 110011, 1800 3000 8282
0800-112-8888
0120-327-527
Asia Pacific
Malaysia
1800-88-9999
1-800-10-SAMSUNG (726-7864), 1-800-3-SAMSUNG (726-7864),
1-800-8-SAMSUNG (726-7864), 02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232, 02-689-3232
0800-329-999
1 800 588 889
444 77 11
Philippines
Singapore
Thailand
Taiwan
Vietnam
Turkey
South Africa
U.A.E
Middle East &
Africa
0860-SAMSUNG (726-7864 )
800-SAMSUNG (726-7864), 8000-4726
AK68-01992A
|